EM-6000H CONFERENCE VIDEO PROCESSOR
ข้อมูลสินค้า
-
รหัสสินค้า
EM-6000H
-
เข้าชม
2,696 ครั้ง
ลิงค์
http://www.audio.co.th/private_folder/em6000H/em_6000H_Cattalog.pdf
-
แก้ไขล่าสุดเมื่อ
14/06/2022 11:10
ดาวน์โหลดไฟล์ PDF
-
รายละเอียดสินค้า
CONFERENCE VIDEO PROCESSOR
Video Camera Auto-Track Conference System
In modern society, the request of conference is not just limited on the simple sound, but also requests the
music, video backup records or remote transmission, this system is designed for meeting this kind of
requests. This system can implements connection between the speaking and photography to implement
the automatic tracking location photography function. This system easy to operate, setting the photography
spot through using the software, and it can also setting the spot without the computer, so that to enhance
the flexibility for using and save the cost.
Function of Video Processor
1. Built-in video switching matrixes (8 inputs, 2 outputs).
2. 256 video camera auto-track control points. Multi-machine cascade
3. Support Pelco-D and VISCA protocol. (Pelco-D, Baud Rate: 9600, VISCA , Baud Rate:9600)
4. The processor can communicate with the equipments by RS232 interface, such computer or video
switching matrixes.
5. High speed dome follows the location for last opening of all speaking representative , when the
microphone which opened last was closed, the dome will follows back the last following camera spot,
and when all the speaking representative microphone were closed, the dome will automatically moves
back to the standby position.
6. When without the computer, set the camera spot advanced through pressing the button in main unit
board, and also set by the IR remote controller.
Schematic diagram:
1. Power switch
2. IR Lens
3. Camera number selecting button (VIDICON 1-8), send the photography to the related display screen
through pressing this button
4. Power indicative lamp
5. Busy indicative lamp
6. Power indicator of each camera
7. Zoom setting
8. Camera direction set button (up, down, left, right)
9. Reset button (delete all the pre-setting spot)10. Save button (save the pre-setting spot)
11. Data port (connect the conference main unit)
12. PC CONNECTOR:Connect this socket to your computer to setup the software function.
13. CAMERA CONTROL CONNECTOR RS232 and RS-422
If you use dome in place of camera you can control pan and tilt move directly from software.Connect
this socket to the control connector of domes.
Note : To know connections, read the user manual of the dome.
14. VIDEO CAMERA INPUTS: Connect these inputs to your camera. Up to 8 cameras max
15. VIDEO OUTPUT:Use this output to display camera video on an external video screen
16. Power supply (AC220V)
Connecting and operation instruction for camera central processor
1. Connect the processor data port to conference main unit data port data cable.
2. Connect the high speed dome date cable to RS232/RS422 interface (if the system has more than 1
camera, please use the multiple connecting), connect the high speed dome video cable (8 camera max)
to each video input of the processor (V1, V2, V3, V4, V5, V6, V7, V8 ), the camera ID should be same
as the video in port
3. Start to preset the video with video processor after u test other functions of the conference system.
สินค้าที่ดูล่าสุด
-
EM-6000H CONFERENCE VIDEO...
โทรสอบถาม
