HDBaseT remotely powered receiver (PD) with HDMI/DVI/RS-232
ข้อมูลสินค้า
-
รหัสสินค้า
CAT-RPD
-
เข้าชม
11,318 ครั้ง
ยี่ห้อ
RGB SPECTRUM
รุ่น
CAT-RPD
ลิงค์
http://www.rgb.com/sites/default/files/products/brochures/SPEC_LXC_Endpoints_2015-02.pdf
-
แก้ไขล่าสุดเมื่อ
27/08/2015 11:28
ดาวน์โหลดไฟล์ PDF
-
รายละเอียดสินค้า
RGB Spectrum’s CAT-Linx™ products use HDBaseT™ technology to transmit HDMI and DVI signals up to 100 meters between Linx Matrix Switcher I/O cards and endpoints. Distances of up to 150 meters are possible with CAT-Linx TX and RX endpoint pairs. Powered Endpoints With integrated Power-over-HDBaseT (PoH) capabilities, CAT-Linx I/O cards supply power to endpoints over the same CAT6 cable that carries video and data signals. This eliminates the need for external power connections. All models of Linx switchers offer sufficient power capacity to support PoH endpoints on every channel simultaneously. CAT-Linx TX endpoints are available as wall plates and standalone units. CAT-Linx wall plates fit a standard single gang Decora panel and support HDMI with embedded audio. CAT-Linx standalone TX units add support for serial data via RS-232. RX endpoints are available as standalone units. To simplify installation, both TX and RX endpoints are available as either PoH line powered (TPS / RPS) or externally powered models (TPD / RPD). The expanded range enables an endpoint pair to be powered by either the transmit unit or the receive unit. Flexibility and Performance In Long Reach Mode, standalone TX and RX endpoint pairs, consisting of one externally powered endpoint and one PoH powered endpoint, can extend transmission of 1080p signals up to 150 meters. Standard Mode provides support for 4K signals, including digital cinema formats. Bidirectional transmission of RS-232 signals between CAT-Linx endpoints and Linx I/O cards enables touch screens or PC control of processors or displays. This eliminates the need for IP connectivity between a system controller and equipment, simplifying installation. CAT-Linx products meet the specifications of the HDBaseT Alliance and are compatible with other HDBaseT-certified products. Additional models of CAT-Linx I/O cards (for inputs or non-scaled outputs) are compatible with OmniWall 16 and OmniWall 32 display processors. Combined with existing choices for copper and fiber transmission, CAT-Linx products further expand the flexibility of Linx switchers and provide a cost effective signal extension option for RGB Spectrum’s display processors.CAT RPD / RPS*Signal Type HDMIPixel Clock Rate 25 MHz - 165 MHzMaximum Resolution 1920x1200/72Connectors HDMI/RJ-45/DB-9Weight < 1Power Consumption 5.5 wattsPhysical Size (H x W x D) 1.18 x 4.13 x 4.57 inches 30 x 105 x 116 mmราคาไม่รวม VAT 7 %
สินค้าที่ดูล่าสุด
-
HDBaseT remotely powered ...
ราคา 45,900.00 ฿
