The Extron MTP 15HD A Series is a versatile family of MTP twisted pair transmitters and receivers for transmitting VGA and summed mono audio signals long distances to presentation displays over a single unshielded twisted pair cable. They are compatible with resolutions up to 1920 x 1200 and will support cable runs of 600 feet (185 meters) or more with XGA signals, and 450 feet (135 meters) or more with UXGA signals.

The MTP 15HD A Series is ideal for systems where high resolution video signals must be transmitted long distances to a display where conduit space is limited or for systems where cabling might be exposed or visible. Ideal applications include public information displays at airports, museums, movie theaters, and hotels.

• Compact Transmitters and Receivers
  
  The MTP T 15HD A transmitter sends RGBHV high resolution video and audio signals to a compatible MTP RL 15HD A, or MTP RL 15HD A SEQ receiver. The MTP 15HD A series non-CAT 7 models can be used with any CAT 5-type twisted pair cable or with Extron Enhanced Skew-Free™ AV UTP cable. Both MTP RL 15HD A receiver models offer separate variable level and peaking adjustments that precisely optimize image quality for various UTP cable lengths. MTPs are compact so they can fit just about anywhere: in equipment racks, under tables and desktops, or next to a projector.

  Buffered Loop-Through
  
  The Extron MTP RL 15HD A Mini Twisted Pair Receiver with Loop Through features an added female MTP buffered output, enabling up to eight receivers to be connected in series, reducing the number of parallel cable runs required.

  Integrated Skew Delay Equalization
  
  The MTP RL 15HD A SEQ features an integrated skew delay equalizer. Skew delay is the color misalignment present in twisted pair AV systems using CAT 5-type cable in which the red, green, and blue video signals arrive at the display at different times. Using Extron's skew delay equalizer technology, the arrival of color signals is synchronized, improving image quality while maintaining full signal integrity.

  The MTP 15HD Series
  
  The compact MTP 15HD Series is designed for easy integration into new and existing AV environments. The MTP 15HD Series is a complete twisted pair system including transmitters, receivers, switchers, and distribution amplifiers, providing the ability to send, route, and distribute high resolution video, audio, and control signals. The entire family of Extron MTP 15HD products sets the price/performance standard for audio/video twisted pair technology.

  Benefits of Using Twisted Pair
  
  Because the MTP 15HD mini transmitters and receivers utilize UTP cable for distribution, they offer considerable advantages in cost, performance, and ease of installation. UTP cable is a fraction of the size of coaxial cable, and much lighter, more flexible, and less expensive, thus providing AV system designers and installers with an economical, space efficient solution for a variety of applications.

  ความสามารถหลัก

• Input: Female RJ-45 connector - all models
• Output: One female 15-pin HD connector, one 3.5 mm captive screw connector, one female RJ-45 loop through connector
• Receives high resolution video and mono audio signals 600 feet (185 meters) or more over a single CAT 5-type cable
• Supports RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, and composite video
• Compatible with HDTV component video, bi-level or tri-level sync
• Separate variable level and peaking controls
• Buffered MTP output for daisy-chaining up to eight receivers
• Independent skew compensation adjustments for each color - MTP RL 15HD A SEQ only
• Compact 1U, quarter rack width, rugged metal enclosure
• Highly reliable, energy-efficient external universal power supply included, replacement part #70-775-01 — Provides worldwide power compatibility, with high demonstrated reliability and low power consumption for reduced operating costs.

• Also see our  Specs in PDF format 

  MTP 15HD A Series
  Video
  Gain	Unity
  Number/signal type	1 set of proprietary analog signals
  Connectors
  MTP R 15HD RSA D	1 female RJ-45 on a pigtail
  All other models	1 female RJ-45
  Video input and loop through — transmitters
  Number/signal type
  MTP T 15HD A	1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video 1 buffered RGBHV, RGBS, RGsB, RsGsBs local monitor loop through (includes ID bits)
  MTP T 15HD A AAP, MTP T 15HD A D, MTP T 15HD A WM	1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video
  Connectors
  MTP T 15HD A	2 female 15-pin HD
  All other transmitters	1 female 15-pin HD
  Nominal level	1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video
  Minimum/maximum levels	0.3 V to 1.45 Vp-p
  Impedance	75 ohms
  Horizontal frequency	15 kHz to 130 kHz
  Vertical frequency	30 Hz to 150 Hz
  Return loss	<-30 dB @ 5 MHz
  DC offset (max. allowable)	250 mV
  Video output — receivers (MTP RL 15HD A, MTP RL 15HD A SEQ, MTP R 15HD RSA D)
  Number/signal type
  MTP R 15HD RSA D	1 analog VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, HD component video, component video, S-video, or composite video
  All other receivers	1 set of proprietary analog signals 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video
  Connectors
  MTP R 15HD RSA D	1 female 15-pin HD
  All other receivers	1 female RJ-45 1 female 15-pin HD
  Nominal level	1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video
  Minimum/maximum levels	0.3 V to 1.45 Vp-p
  Impedance	75 ohms
  Return loss	<-30 dB @ 5 MHz
  DC offset
  MTP R 15HD RSA D	<±20 mV with input at 0 offset
  All other receivers	<±35 mV with input at 0 offset
  Skew compensation	62 ns
  Maximum resolution	Up to 1920x1200 or 2048x1080 or 1080p at 300' Up to 1024x768 at 600'
  NOTE     See the user guide for the maximum distances recommended for specific resolutions.
  Sync
  Input type (transmitters)	RGBHV, RGBS, RGsB, RsGsBs
  Output type (receivers)	RGBHV, RGBS, RGsB, RsGsBs
  Standards	NTSC 3.58, NTSC 4.43, PAL, SECAM
  Input level (transmitter)	3.5 V to 5.5 Vp-p, unterminated
  Output level (receivers)	4.0 V to 5.0 Vp-p, unterminated
  Input impedance (transmitter)	573 ohms ±5%
  Output impedance (receivers)	110 ohms
  Max. input voltage (transmitter)	5.5 V p-p
  Polarity
  Transmitter	Positive or negative (follows input polarity)
  Receivers	Positive or negative (switch-selectable)
  Audio — all models
  Number/signal type	1 set of proprietary analog signals
  Connectors	1 female RJ-45
  Gain	Unbalanced output: 0 dB; balanced output: +6 dB
  Frequency response	20 Hz to 20 kHz, ±1 dB
  THD + Noise	0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level
  S/N	>70 dB at maximum output (unweighted)
  Stereo channel separation	>60 dB @ 1 kHz
  CMRR	>43 dB @ 20 Hz to 20 kHz
  Audio input — transmitters
  Number/signal type	1 stereo, unbalanced
  Connectors	(1) 3.5 mm mini stereo jack
  Impedance	>10k ohms, unbalanced
  Nominal level	+4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
  Maximum level	+18 dBu, (unbalanced) at 1%THD+N
  NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
  Audio output — MTP T 15HD A AAP, MTP T 15HD A D, MTP T 15HD A WM local stereo output
  Number/signal type	1 stereo, balanced/unbalanced
  Connectors	(1) 3.5 mm direct insertion captive screw connector, 5 pole
  Impedance	50 ohms unbalanced, 100 ohms balanced
  Gain error	±1 dB channel to channel
  Maximum level (Hi-Z)	>+23 dBu, balanced or unbalanced at 1% THD+N
  Maximum level (600 ohm)	>+17 dBm, balanced or unbalanced at 1% THD+N
  Audio output — receivers
  Number/signal type
  MTP R 15HD RSA D	1 mono, balanced/unbalanced
  All other receivers	2 mono, balanced/unbalanced
  Connectors
  MTP R 15HD RSA D	(1) 3.5 mm captive screw connector, 5 pole (uses 3 poles)
  All other receivers	(1) 3.5 mm captive screw connector, 5 pole
  Impedance	50 ohms unbalanced, 100 ohms balanced
  Gain error	±1 dB channel to channel
  Nominal level	+4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
  Maximum level
  MTP R 15HD RSA D	14 dBm, unbalanced at 1% THD+N
  All other receivers	+18 dBu, unbalanced at 1% THD+N
  Control/remote — external device (pass-through, unidirectional or bidirectional) — MTP R 15HD RSA D only
  Serial control port input/output	1 set of proprietary signals on a female RJ-45 jack
  Serial control port output/input	RS-232 via 3 poles of a 3.5 mm captive screw connector, 5 pole
  Baud rates	Up to 38400 bps at up to 1000' (304.8 m) (Higher data rates and distances are possible. Performance varies based on baud rate and cable length.)
  Protocol	Data bits = 5 - 8 Stop bits = 1 or 2 Parity = odd, even, none Flow control = XON, XOFF, none
  NOTE     Protocol is mirrored between the transmitter and the receiver.
  Serial control pin configuration	Captive screw connector: 1 = Tx, 2 = Rx, 3 = GND
  General
  Recommended cable type	CAT 5/5e/6 (shielded or unshielded)
  Power supply	External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1.5 A, 18 watts
  Power input requirements	12 VDC, 0.5 A
  Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
  Cooling	Convection, no vents
  Mounting
  Rack mount
  MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ	Yes, with optional rack shelf
  Furniture or wall mount
  MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ	Yes, with optional under-desk mounting kit
  MTP T 15HD A AAP	Yes, with optional AAP mounting faceplates that have double space high AAP opening
  MTP T 15HD A D, MTP R 15HD RSA D	Yes, in a decorator-style opening with a standard electrical wall box or standard 1-gang US size mud ring
  MTP T 15HD A WM	Yes, in a 1-gang opening
  Pole mount
  MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ	Yes, with optional pole mounting kit
  Enclosure type	Metal
  Enclosure dimensions
  MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ	1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide) 4.3 cm H x 10.9 cm W x 7.6 cm D (Depth excludes connectors.)
  Faceplates
  MTP T 15HD A AAP	1.4" H x 3.5" W x 0.1" D (3.6 cm H x 8.9 cm W x 0.3 cm D) (double space high AAP plate)
  MTP T 15HD A D, MTP R 15HD RSA D	2.6" H* x 1.3" W x 0.1" D (6.6 cm H* x 3.3 cm W x 0.3 cm D) (Fits the opening in a 1 gang, 4.4" H x 2.7" W decorator-style wallplate. Depth excludes connectors.) *Overall height is 4.1" (10.4 cm) including mounting tabs.
  MTP T 15HD A WM	4.5" H x 2.8" W x 0.1" D (11.4 cm H x 7.1 cm W x 0.3 cm D) (1 gang)
  Device
  MTP R 15HD RSA D	2.75" H x 1.65" W x 1.3" D (7.0 cm H x 4.2 cm W x 3.3 cm D) (Depth excludes connectors.)
  Other AAP, D, and WM models	2.7" H x 1.4" W x 1.4" D (6.9 cm H x 3.6 cm W x 3.6 cm D) (Depth excludes connectors.)
  Product weight	0.4 lbs (0.2 kg)
  Regulatory compliance	CE, C-tick, c-UL, UL, FCC Class A, ICES, VCCI
  Product warranty	3 years parts and labor
  Everlast power supply warranty	7 years parts and labor
  NOTE     All nominal levels are at ±10%.
  NOTE     Specifications are subject to change without notice.

  

  สิ่งพิมพ์ต่างๆ	รายละเอียด	ภาษา	เวอร์ชั้น	ขนาด	Format
  ไทย
  Brochure	Twisted pair hits mainstream	ไทย	A	0.7 MB	PDF
  อังกฤษ
  Brochure	MTP 15HD A Series	อังกฤษ	C	1.4 MB	PDF