| A/D Conversion |
24 Bit linear, Sigma-Delta, 128 times oversampling |
| Amplifier Gain |
39, 35, or 32 dB Switchable |
| Analog Inputs |
Yes |
| CAN Bus Interface |
10 - 500 kbaud, 2x RJ-45 (IRIS-Net Control) |
| Continuous Rated Power (1 kHz, THD 1%) 2Ω |
2000 Watts |
| Continuous Rated Power (1 kHz, THD 1%) 4Ω |
1450 Watts |
| Continuous Rated Power (1 kHz, THD 1%) 8Ω |
850 Watts |
| Continuous Rated Power (20-20 kHz,THD<0,2%) 4Ω |
1200 Watts |
| Continuous Rated Power (20-20 kHz,THD<0,2%) 8Ω |
600 Watts |
| Control Protocol |
CAN-Bus (with RCM 26 module) |
| D/A Conversion |
24 Bit, Sigma-Delta, 128 times over-sampling |
| Data Format |
24 Bit linear A/D and D/A conversion, 48 Bit processing |
| Digital Inputs |
Optional with RCM-26 |
| DIM 30 |
0.02 % |
| Electronics Type |
Amplifier |
| FIR-Drive |
Optional with RCM-26 |
| GPIO Control Ports |
1 x 6-pole Euro block, 2 control inputs, 2 control outputs, (+5 V, 200 mA/GND) |
| Impedance |
2/4/8 Ω |
| Input Impedance (Balanced) |
20 kΩ |
| Input Sensitivity |
0 dBu / +6 dBu / +7 dBu Selectable |
| Intermodulation Distortion (SMPTE) |
0.05 % |
| Internal Processing |
2 DSPs (150 MHz, 300 MIPS) |
| Maximum Bridged Output 4Ω |
3800 Watts |
| Maximum Bridged Output 8Ω |
2900 Watts |
| Network Control (IRIS-Net) |
Optional with RCM-26 |
| Power Consumption |
1000 W |
| Power Supply |
100 - 240V, 50 - 60 Hz |
| Sample Rate |
48 kHz |
| Sample Rate Conversion (SRC) |
32 kHz - 192 kHz, internal Sample-Rate- Converter |
| Signal-to-Noise Ratio (A-weighted) |
109 dB |
| Slew Rate |
30 V/µs |
| Topology |
Class-H grounded bridge |
| Total Harmonic Distortion |
0.05 % |
| Height |
2RU 88.1 mm (3.47") |
| Width |
482.6 mm (19") |
| Depth |
512 mm (20.16") |
| Weight Net |
14.2 kg (31.31 lbs) |